Waterproof pre-insulated hexagonal compression lugs

click:    Date:2020.06.06

These pre-insulated lugs are suitable for insulated stranded aluminium conductors. Stripped cables are inserted up to the end. Crimping according to the marks with appropriate crimping die size over the insulation. The electrical contact and the sealing by the elastomeric ring are achieved during the crimp process. Available with aluminium palm (CPTA) and as bimetallic lug with a copper palm (CPTAU).
 
Features
Suitable for stranded Aluminium conductors
Mechanical strength achieved is 50%of cable breaking load
Tested for water tightness at a voltage of 6 kV for 30 min in a waterbath
Three die sizes (E140, E173, E215) for all connector sizes
 
Exceeds requirements according to CENELEC prEN 50483-4 class 1, NFC 33021 and ESI 43-14
A colour code of elastomeric sealing ring allows an easy identification of the cross sections
Inner aluminium sleeve filled with contact grease
Insulation material made of weather and UV resistant polymer

IF YOU HAVE ANY QUESTIONS PLEASE CONTACT US !

Contact Us