Tools

Hydraulic Crimping Tools
1.The compression pliers are designed for hydraulic crimping on power
calbe and wire.The crimped conductor is tested in high conductivity and 
close contact so that it's easy to break out and turn hot.
2.Open out design for convenient operation.
3.Dies are quickly put on tube by double speed unit.Then compression 
force lift and automatically change to low speed.The operation finishes with energy saving and time shorten.
4.Fitted with safety valve.When pressure reaches to limited max.Value,pressure release automatically to prevent over pressure.
5.Standard eleven sets of die assembling: 16、25、35、50、70、95、120、150、185、240、300 
6.Packing case is made from robustintegral plastic box.

Specifications
Output
12T
Contact Mould
16-240mm2 
Ram Stroke
25mm
Size
520×145×80mm
Weight
7.0kg